StudioCob PlusTU LED outdoor spot (frontlicht) met barndoors set van 2

 60,00 incl btw (excl borg)/ dag

2-4 days : -5%
5-7 days : -10%
8-9 days : -15%
10 days : -25%

2 sets beschikbaar

Borg €250.- contant bij afhalen

Bij compleet werkend en volledig schoon retour ontvangt u de borg retour.

 

2 op voorraad

Datums wissen

Beschrijving

StudioCob PlusTU LED outdoor spot (frontlicht) met barndoors

 

Prolights STUDIOCOB is de nieuwe standaard op het gebied van LED spots / LED par. Uitgerust met een COB LED ( Chip on Board technologie) en een vernieuwd optiek om zo de efficiëntie te maximaliseren en te zorgen voor ongekende prestaties met een hoge output. STUDIOCOBFC is een LED par die maakt gebruik van een 150W COB CREE LED bron wit, in combinatie met een speciale parabolische reflector van aluminium die een extreem heldere en homogene 60° bundel projecteert. STUDIOCOB is een LED spot die is ontwikkelt voor professionele podia en kan gebruikt worden met camerasystemen door de anti-flikker technologie, via de user interface is de frequentie aan te passen.

  • Key Features

    • IP65 rated connectors for easy use both indoor and outdoor
    • 150W 3.000K Warm White COB LED source with HD dimming and high CRI
LIGHT SOURCE
  • Source: 150W White COB LED
  • Source CCT: 3.000K
  • Luminous flux: (18°) 8’419 – (38°) 7’837
  • Lux: (18°) 5’873lx @3 m
  • Lux: (38°) 1’483lx @3 m
  • CRI: > 90
  • Source life expectancy: > 30.000 h
OPTICS
  • Beam angle: (on-board) 18° – (inc) 38° – (opt) 60°
  • Field angle: (on-board) 36° – (inc) 63°
  • Lens type: parabolic reflector in combination with HD fresnel lens
  • Additional optics: flood (without lens) – 38° (inc)
DYNAMIC EFFECTS
  • Static mode: selection of static colour
  • Manual mode: manual adjustment of dimmer and strobe
  • Auto mode: built-in programs with execution speed adjustment
CONTROL
  • Supported Protocols: DMX512, RDM
    • DMX channels: 1 / 2 / 5ch
    • RDM: for remote addressing and parameter configuration
    • Display: black OLED touch display
    • Master/Slave: for synchronised operation of more units linked in a chain
    ELECTRONICS
    • Dimmer: linear 0 – 100% electronic dimmer
    • Dimmer curves: 4 selectable dimming modes available
    • Strobe / shutter: 1 – 28 Hz, electronic
    • Display battery: included, self-charging battery backup
    • Selectable PWM: 600 to 25000 Hz (selectable steps)
    • Firmware upgrade with: via DMX with UPBOXPRO/UPBOX1 (not included)
    CONNECTIONS
    • Power connection: Seetronic powerCON waterproof IN/OUT connectors
    • Signal connection: Seetronic XLR 5p IN/OUT connectors
    ELECTRICAL
    • Mains power supply: 100-240V – 50/60Hz
    • Max power consumption (230V): 141W
      • Output (at 230V): 25 units on a single power line
      • Max power consumption (120V): 147W
      PHYSICAL
      • IP rating: IP65 for temporary outdoor use
      • Cooling: forced-air with low-noise fan
      • Housing: Sturdy die-cast aluminium body
      • Finish: black or white finishing
      • Operating temperature: Ta -20 to +45 °C (-4 to +113 °F)
      • Dimensions (WxHxD): 259x187x370mm / 10.2”x7.36”x14.57”
      • Weight: 4,95kg / 10.91lbs
      INSTALLATION
      • Suspension and fixing: double bracket for hanging and floor positioning
      CERTIFICATIONS / REPORTS
      • Compliance: CE, UKCA, RCM, cTUVus, FCC
      BOX CONTENT
      • 1 x STUDIOCOBPLUSTU
      • 1 x 1,5 meters 3G1,5mmq power cable (BARE END – SEETRONIC POWERCON TRUE1 IP65 power connector)

     

 

Aanvullende informatie

Gewicht

6KG